FAQs
Can I apply this myself at home?
Yes. While this is an industrial-grade material, it can be applied using a brush, sponge, roller, or spray gun.
If using a sprayer, use 95-120 psi, and avoid “zebra” stripes. Spray from side to side back and forth with small overlap so the subject is uniform or monolithic, smoothing out the overlaps with a sponge if necessary. Sprayer should be held approximately 18 inches between surface and sprayer. Nozzle opening should be between 1/16 th inch opening and 1/8 TH inch opening in size. One pint covers approximately 30-35 square feet.
How do I prepare the surface?
Critical step: The surface must be 100% free of oils, grease and rust and paint flakes. For metal, we recommend light sanding or abrasive blasting to the surface to ensure the ceramic bond is permanent. Some light rust or paint residue is ok if imbedded in the metal so as not to interfere with the bond. For
brick and wood, ensure the material is dry, dust-free and free of paint flakes.
How long is the cure period and does it require "heat curing"?
Although it dries to the touch in about an hour, the material should “cure” 12 to 24 hours for most applications. For Intense heat applications let it “cure” up to 48 hours. For residential items like grills or fire pits, the first few uses typically act as the final cure.
How do I clean the surface after it has been coated?
Because the coating is resistant to water and rust, you can clean it with mild soap and water. Avoid abrasive cleaning tools, harsh chemicals or heavy grinding, as this can chip the protective layer.
How long will the coating last?
Indoors (e.g., fireplace flues), it can last indefinitely. For outdoor items exposed to sun and rain, although it is a permanent application, we recommend a refresh when necessary to maintain the best appearance and protection or if the surface becomes overly scratched.